In 2024, Derek Poupard CJF DipWCF was inducted into the International Horseshoeing Hall of Fame at a ceremony in Cincinnati. For those of us who work alongside him every day it was a good evening and a strange one, because Derek is not a man who stops to look back. He was at the printers again the following week. But the recognition matters, and it is worth setting out what it recognizes.
More than forty years at the anvil
Derek trained in South Africa and has been shoeing horses for more than forty years. That is the plain fact behind everything else on this page. Before there was a product range, before there was a printer in Sarasota, there was a farrier who spent decades under horses, in every kind of weather, learning what feet do under load and what they do when the load is wrong.
Much of that time was spent at the top of the sport. Derek worked with Godolphin and with other elite racing operations, where the demands on a foot are about as high as they get and the margin for error is about as small. Across that career he shod around 40 Group 1 winners. Nobody gets that many top-level horses to the start by accident. It comes from attention to detail, cycle after cycle, on feet that are being asked to do extraordinary things.
The letters after the name
CJF is the Certified Journeyman Farrier qualification from the American Farrier's Association. DipWCF is the Diploma of the Worshipful Company of Farriers in the United Kingdom. Holding both is uncommon. They represent two different traditions of examining a farrier's work, on two continents, and Derek passed both.
The Hall of Fame sits on top of that. It is an honor voted on by the profession, and it is given for a body of work rather than a single achievement. Induction places Derek among farriers whose influence on the trade has been recognized by their peers over a career.
Why it matters for what we make
Our 3D printed pads and inserts are designed by Derek. Not approved by him, not endorsed by him. Drawn by him, in 3D, from what he has seen go wrong on feet and what he has worked out will put it right. The Half Mesh and Full Mesh pads and the inserts: each one started as a problem he met on a horse and could not solve with anything on the market.
The parts are then printed in Sarasota, Florida, on our own machines. That means the thing that arrives in your box is the geometry he designed, not an approximation of it. It also means that when a foot needs something that does not exist, we can often make it.
So when you see the Hall of Fame on this site, read it as a note about where the designs come from. They come from a farrier the profession has recognized as one of its best, and they are shaped by forty years of looking at feet, not by a marketing brief.
The community around the work
Derek does not work in isolation and never has. The 3D HoofCare community is now more than 28,000 people: farriers, trimmers, vets and owners sharing cases, photographs and results, and arguing in good faith about what works. A great deal of what Derek has designed in recent years has come directly out of that group, from the questions people ask and the feet they post.
That is the part of the story we are proudest of. The Hall of Fame recognizes a career. The community is what that career is now spent on.
What comes next
More of the same. Derek is still designing, still at the printers, still looking at the photographs people send us with a ruler in the shot. If you have a foot that nothing standard fits, that is who ends up looking at it.
Congratulations, Derek. From all of us.




























































