Adhesive choice decides whether a glue-on stays on. We stock two adhesive types, HoofLox Acrylic and HoofLox Super Glue with its activator. They are not rivals. Many applications use both: the super glue sets the pad or shoe in place in seconds, and the acrylic makes the structural bond on the wall.

HoofLox Acrylic: the structural bond

HoofLox Acrylic is a two-part acrylic in 150 ml cartridges, in Natural or Black. It sets in roughly 90 to 120 seconds and can usually take load in about five minutes. Acrylics stay slightly flexible once cured, carry load well, and can fill a small gap, for example where a Squish Pad cuff sits a little off the wall because the foot falls between sizes. You need the application gun (or the adapter for a standard caulking gun) and a fresh mixing tip each session. Purge the first squeeze through every new tip and discard it.

Super glue and activator: the instant set

HoofLox Super Glue is a cyanoacrylate. With HoofLox activator, in the 200ml aerosol or the 50ml pump spray, it cures on contact, which is what you want when you are setting a pad on a foot and need it to stay exactly where you put it. It does not fill gaps, so it needs a clean, sound wall. On a Squish Pad, spray the inside of the pad with activator, run a thin bead of super glue around the bottom of the hoof wall and set the foot in.

Note: HoofLox is subject to international shipping restrictions. Check availability for your country before ordering.

The rule that matters more than brand: temperature

Every hoof adhesive is temperature-sensitive. Keep the glue, the hoof, and the pad at similar, moderate temperatures. Glue stored in a hot truck or applied to a freezing hoof will not perform, whatever the label says. In cold weather, warm the cartridge indoors first; in heat, keep it shaded.

Quick chooser

  • Squish Pads: super glue and activator to set the pad, then HoofLox Acrylic on the cuffs.
  • EasyShoes: shoe on the foot first, then HoofLox Acrylic on the cuffs.
  • Barefoot Protection Pads: HoofLox Acrylic.
  • Clean walls, instant tack (patches, small repairs): HoofLox Super Glue and activator.
  • Want everything in one box? The Glue & Go Complete Bundle has the gun, HoofLox Acrylic, super glue, activator, tips, impression material and plastic wrap. Already own a caulking gun? Choose the Glue & Go Standard Caulking Gun Bundle.

Whichever you choose, the bond is only as good as the preparation underneath it: read How to Prep a Hoof for Gluing before you mix anything.

This guide is educational and is not a substitute for professional farrier advice.